Use Flow with remote desktops

Last updated: November 20, 2026

Available on: Mac and Windows as the local computer. Run Flow locally, not inside the virtual desktop.

Flow uses your local microphone and clipboard to deliver text to a remote desktop. If a remote text field stays empty or a stray character appears, use the matching recovery below.


Enable clipboard sharing

Flow needs an internet connection for transcription. Clipboard sharing must be enabled in the remote client and allowed by your organization.

Note: If your company blocks clipboard transfer, ask IT for an approved alternative; installing Flow inside the virtual desktop does not lift that restriction. Some policies permit text transfer but prohibit files.

  1. Dictate a short phrase locally into Notes or Notepad. If it fails there too, use text-pasting troubleshooting first.

  2. Copy a short piece of local text.

  3. Paste it into a remote text field. If that fails, check your client below and your organization's policy.

Client

What to check

Microsoft Remote Desktop on Windows

Before connecting, open Show Options → Local Resources and check Clipboard.

Microsoft Windows App / Remote Desktop on Mac

Enable Clipboard in the client's preferences or connection settings.

Citrix Workspace

Ask IT to confirm clipboard redirection is allowed for your session.

VMware Horizon

Enable clipboard redirection in connection settings; organization policy can override it.

Amazon WorkSpaces

Check clipboard redirection in client preferences if transfer fails.

Windows 365 / Azure Virtual Desktop

Ask IT to review clipboard redirection in host-pool settings if blocked.

VNC, macOS Screen Sharing, Splashtop, TeamViewer

Enable clipboard sharing or clipboard sync in client preferences.


Dictate from your local computer

Mac requires microphone and Accessibility permissions through Flow's setup prompts; Windows requires microphone access in Windows settings, but not Accessibility permission. Flow notifies you if required access is revoked.

  1. Choose your microphone in Flow's Settings → General → Microphone → Change.

  2. Connect to the remote session.

  3. Click inside an editable remote text field.

  4. Use your Flow shortcut and dictate. On Windows, fully release the shortcut's modifier keys; holding them can prevent pasting.

  5. Wait for the paste to finish before editing or moving focus. If text appears in the remote field, delivery worked; otherwise use the recovery below.

If Flow cannot use your microphone

On Windows, when a microphone notification appears as you dictate, select Open Settings in it, grant access, then dictate again rather than waiting for an in-app status to change. For No microphone detected, that button opens Sound Settings, not Privacy settings; for Selected microphone is unavailable, select Choose Microphone and pick a connected device.


Clipboard behavior

Before pasting, Flow briefly saves whatever is already on your clipboard, then puts the dictation there. On Mac that wait is at most a second, so a slow or unresponsive remote client never holds up your paste. On Windows, Flow holds the dictation on the clipboard until the app accepts it — up to about 7 seconds in a slow app or remote viewer — and pasting during that hold pastes the dictation again, not your earlier clipboard. The viewer must be frontmost when Flow pastes.

Warning: Not all clipboard content returns after dictation.

  • If you copy something new during a pending paste: on Windows the new copy replaces your pre-dictation clipboard; on Mac Flow leaves the new clipboard in place and does not restore the earlier content.

  • Failed or cancelled paste: the transcript stays available for manual pasting, but the previous clipboard is not restored, even if the remote app accepts a late paste.

  • Slow apps on Mac: if an app is slow to hand over its own special formats (such as an Office object or Illustrator artwork), Flow restores only the essentials — text, rich text, links, files and one image — so pasting back may give text, formatted text or an image instead of the original object. If nothing could be saved in time, the dictated text stays on your clipboard in place of your earlier content.

  • Excluded formats: Windows does not restore copied files, PDF, RTF, audio, CSV and some other formats; Mac excludes file contents, PDF, RTFD and sound.

During automatic pasting, Flow excludes dictation from Windows Clipboard History and cloud clipboard; on Mac it marks dictation as sensitive so compatible clipboard tools can exclude it. Content you had marked as concealed or a password stays marked when it is restored.


Recover a failed paste

Flow needs a focused, editable text field and may not recognize a field inside a remote viewer. Recovery can appear for a failed paste or when your previous clipboard text was inserted instead of your latest dictation; when the recovery notification contains your transcript, Flow has already copied it to the clipboard.

  1. Select Copy in the recovery notification if you need to copy the transcript again.

  2. Paste into the remote text field using the remote operating system's paste command.

Reuse the last transcript

These shortcuts reuse your last transcript without dictating again.

Action

Mac default

Windows default

Paste last transcript

Cmd+Ctrl+V

Shift+Alt+Z

Copy last transcript

Cmd+Ctrl+C

Shift+Alt+X

Release every key in the shortcut before it pastes; an interrupted shortcut cancels the pending paste. Custom bindings replace the defaults — check Flow's Settings → Shortcuts, where Reset to default restores a cleared shortcut.

If the recovery notification is missing

Recovery appears at most once per dictation, and the automatic copy to your clipboard happens only if the notification appears. It can be suppressed by incomplete setup, an organization policy, an open Flow chat panel, an unavailable notification window, or another non-error notification already showing. On Mac it is also skipped when your earlier clipboard could not be saved before the paste. Use Copy last transcript and paste manually instead.

Mac: a stray character appears

This happens in multiple Mac remote-desktop clients, not only Citrix, and needs a guest-native paste. Paste last transcript can produce the same stray character because it repeats Flow's normal dictation paste.

  1. Delete the stray character.

  2. Paste with the guest operating system's own paste command inside the remote session.

  3. Copy with Copy last transcript if needed, then repeat the guest-native paste. If the transcript appears without the stray character, recovery worked.

Windows: retry or copy separately

The transcript reaches your clipboard before Windows attempts the paste, including when the automatic paste is blocked.

  1. Try Ctrl+V in the remote field, or use Paste last transcript.

  2. Use Copy last transcript if you need a separate copy-and-paste step, then paste into the remote field. If text appears in your target field, delivery worked.

Windows: “Update admin settings to paste!”

Windows blocks pasting into any foreground app running with higher privileges than Flow, not just remote clients. Flow shows “Update admin settings to paste!” and “Run Flow as Administrator to insert text everywhere”; the notification has no action button and dismisses quickly. The privilege check applies to each paste attempt.

  1. Check the remote field first — the text sometimes arrives even though this notification appeared.

  2. Restart Flow as administrator yourself.

  3. Dictate into the same remote field again. If text appears, the paste is no longer blocked.

If a remote session intercepts shortcuts

Use these menu entry points instead:

  • Flow Bar context menu: Paste last transcript, or Transcript history to open Flow's Dictation page.

  • Mac menu-bar icon or Windows tray icon: Paste last transcript, disabled without a last transcript. On Windows, right-click the icon.

  • Mac application menu: Wispr Flow menu bar → Dictation → Copy last transcript copies only; paste manually afterward. Windows has no application menu.

If manual transfer still fails, recheck clipboard sharing.


Recover from History

Open local History to find missing text. “Couldn't access your microphone.” and “Your transcription was interrupted. But Flow can still retry it for you.” indicate capture or processing failures, not paste failures.

Warning: Deleted transcripts cannot be recovered.

Successful transcript

Unsuccessful rows have no copy button.

  1. Click the successful row or Copy transcript.

  2. Paste into the remote field.

Failed recording

Retry requires stored audio no older than 14 days and no dictation in progress. Dismissed or processing rows show Recover.

  1. Use Retry or the row menu's Retry transcript when stored audio is available.

  2. Copy the transcript produced by a successful retry, then paste into the remote field.


If the text looks wrong

Wrong characters

Check both the local and remote systems.

  1. Check their language and keyboard settings.

  2. Paste into Notepad, then copy the text from Notepad.

  3. Paste into the target app.

Spacing and capitalization

Remote sessions do not give Flow the surrounding text it uses for context-aware formatting. With no text before the cursor, Flow adds no leading space, does not lowercase the first word and keeps trailing sentence punctuation.


Still stuck?

If remote pasting still fails, open Help → Talk to support for the in-app Contact Us form. Include the remote client, local and guest operating systems, what you tried, whether local dictation works, and whether ordinary clipboard transfer succeeds.