Dictate emails in Microsoft Outlook

Last updated: November 21, 2026

Available on: Mac, Windows, iOS, and Android — with the Outlook desktop or mobile app, or Outlook on the web in a desktop browser.

Dictate the body or subject of an Outlook email with Flow. Flow needs an internet connection and applies your email writing style in Outlook.


Mac and Windows

Start Flow — check the menu-bar icon on Mac or the system-tray icon on Windows, since the Flow Bar may be hidden. On Mac, enable Wispr Flow in System Settings → Privacy & Security → Accessibility.

The default dictation shortcut is Fn on Mac (Ctrl+Opt without an Fn key) and Ctrl+Win on Windows; some first-time Windows setups also accept Caps Lock until shortcut setup is complete, while Ctrl+Win remains unchanged. Caps Lock is the only non-modifier key you can bind alone. Open Shortcuts from Flow's menu-bar or system-tray menu to check, change, or reset bindings.

Warning: Esc, a quick triple-press, or a second press immediately after starting hands-free cancels instead of inserting. A hold shorter than half a second can be discarded, and combining the dictation key with another shortcut within the first second cancels hold-to-dictate.

  1. Choose New Email in Outlook, or reply to a message.

  2. Click inside the body or Subject field and confirm you see the cursor.

  3. Hold your dictation shortcut while speaking.

  4. Release the shortcut to finish.

  5. Wait for the text to appear before switching windows or editing.

The same steps work in Outlook on the web. Flow inserts the whole dictation as one paste into the field focused at insertion; moving focus beforehand can send text elsewhere or make pasting fail.

While recording, Flow warns at 19 minutes and stops and submits — not discards — at 20 minutes, showing a Transcription session ended card with Recover; these notices do not appear once processing has started. Split longer emails into separate dictations.

Desktop Outlook accepts formatted dictation, which inherits the surrounding email's font. Fields without formatting receive plain text, including readable bullet and numbered-list markers.

Use hands-free dictation

The default hands-free shortcut is Fn+Space on Mac, Ctrl+Opt+Space on Mac keyboards without Fn, or Ctrl+Win+Space on Windows.

  1. Start hands-free by double-tapping your dictation shortcut or pressing the hands-free shortcut.

  2. Press the shortcut again after speaking to stop and insert the text.

Clipboard behavior and possible data loss

On Windows, Flow keeps dictated text on the clipboard for about 3 seconds after insertion into classic or new Outlook; Ctrl+V in any app repeats it during that window. Flow then restores your previous copy unless you copied something newer. On Mac, Flow waits up to 1 second to save your clipboard before dictating.

Warning: Windows restores text, HTML-formatted text and images, but not files, PDF, RTF, audio or CSV. Mac restores text, RTF/HTML, links, file references and one image — not file contents, PDF, RTFD or sound — and specialized items such as Office objects or Illustrator artwork may return only as text, formatted text or an image. If nothing could be saved in time, or a paste fails, the dictated text replaces your previous clipboard contents.


iPhone

Flow needs microphone access and Settings → General → Keyboard → Keyboards → Flow → Allow Full Access; Full Access changes take effect without a restart. Missing permissions produce a prompt with a button that opens Settings. If Flow is missing from the keyboard list, see iPhone keyboard setup.

Warning: While dictation is processing, tapping the dictation button cancels processing rather than starting another recording. The X button also cancels without inserting text.

  1. Open Outlook and compose or reply.

  2. Tap the email body to show the keyboard.

  3. Long-press the globe key to choose Wispr Flow; a tap advances to the next keyboard.

  4. Tap the dictation button to start speaking.

  5. Tap the same button, now a checkmark, to stop.

  6. Keep the Flow Keyboard visible until the text is inserted.

Flow does not switch keyboards for you in recipient or numeric fields. Pause an active Notetaker recording before dictating. For a dictation error, open the warning-triangle menu beside the dictation button and choose Retry or Dismiss; Retry needs saved audio, and if it cannot be loaded, no text is inserted.

Some corporate Outlook policies block third-party keyboards. If your organization permits it, use Quick Dictation to Clipboard and paste into Outlook, or dictate in another supported app and copy the text. Siri phrases include "quick dictate with Flow" and "dictate to clipboard with Flow"; see iPhone shortcuts.


Android

By default, the Flow Bubble requires a visible keyboard and hides when you dismiss it. If the bubble is missing, follow Android setup.

Warning: Cancel (X) discards the dictation. During processing, Done is unavailable and only Cancel remains; after hold-to-dictate, Cancel appears 3 seconds into processing.

  1. Compose or reply in Outlook.

  2. Tap the body so the keyboard appears.

  3. Place the cursor at the end of any existing draft text.

  4. Tap the Flow Bubble to start speaking.

  5. Tap Done to finish.

  6. Check that the text appears in Outlook.

Alternatively, hold the bubble while speaking and release to submit; you do not need Done, and releasing still submits if the connection drops mid-hold. Starting offline instead shows "No internet. Try again later." without recording.

Password, numeric and phone fields suppress the bubble — as do restricted banking apps — with exceptions for browser address bars and system notification replies. When Flow refuses insertion into a sensitive field, the transcript goes to the clipboard with its text hidden from clipboard previews and keyboard suggestions, and re-copying preserves that protection. Any other text Flow copies behaves like a normal copy and appears in clipboard previews and suggestions.

If insertion fails, Flow copies the transcript, shows "Text copied to clipboard", and saves it in history: tap Paste if offered, or paste the clipboard text into Outlook. The separate Copy to clipboard button copies the text that failed to insert and disappears after 5 seconds; tapping the Wispr icon dismisses the error without clearing the clipboard. When insertion cannot be confirmed, Flow fills only a field it can read as empty — existing draft text or an unreadable field is left untouched and the dictation goes to the clipboard instead.

A failed transcription shows "Failed to transcribe. Saved in the app." and offers retry; Flow saves the entry and keeps the captured audio.


If desktop text does not appear

A failed paste shows your dictated text with "Select a textbox first, then dictate" (during setup, "Click on a textbox first and then dictate"), copies it to the clipboard and offers Copy. The same recovery applies if your previous clipboard contents appeared instead.

Warning: Wait for processing to finish before using Paste last transcript; using it during processing cancels that dictation.

  1. Click the intended Outlook field.

  2. Press Cmd+Ctrl+V on Mac or Shift+Alt+Z on Windows, or your custom paste-last shortcut.

  3. Release every shortcut key to paste, then check the Outlook field.

You can also choose Paste last transcript from Flow's menu-bar or system-tray menu when a transcript exists; dismissed, failed or unformatted dictations are retried before pasting. On Windows, "Update admin settings to paste!" means Flow needs to run as Administrator to insert into that app.

If pasting still fails

Paste-last and copy-last shortcuts are customizable in Settings → Shortcuts. The copy shortcut produces plain text.

  1. Copy the last transcript with Cmd+Ctrl+C on Mac or Shift+Alt+X on Windows.

  2. Paste it into the email body.

  3. Test dictation in Notes or Notepad if the text still does not appear.

If Flow works there, quit and reopen Outlook, then try again. If it fails everywhere, follow text-pasting troubleshooting.

Recover a desktop transcription

The desktop "Is your internet connected?" notice does not block recording and clears when Flow confirms connectivity. Audio is saved for retry if transcription fails.

Important: If your organization prevents audio storage, failed dictations cannot be recovered or retried from History. Otherwise, retry requires saved audio from the past 14 days; older dictations cannot be retried, played or downloaded.

  • Transcription error: The notification's Retry retries and pastes the result.

  • Missing formatting: "Formatting may be missing. Tap to retry" opens History and retries without pasting; copy the recovered text into Outlook afterward.

  • Missing Retry link: Failed or empty recordings shorter than 5 seconds use the row menu's Retry; dismissed or unfinished entries offer Recover, and dismissed recordings under half a second are not saved.

Finish recording before retrying; Flow refuses retry while you dictate. Other failures show "Retry failed. Please try again." and leave the entry unchanged. A History entry reading "Couldn't access your microphone." has no Retry link, and audio that was never captured needs a fresh recording.


Errors and account restrictions

Follow the action shown for a microphone, network or transcription error. If Flow reports that your network blocks requests, contact your IT admin.

On desktop, the free plan warns at 2,000 words a week and stops dictation at 5,000; an active 8,000-word bonus raises both thresholds to 10,000. Flow shows the reset as Sunday, 12 a.m. PT, and paid and trial accounts — Pro, Teams and enterprise — are not blocked by this limit. Check the allowance shown in Flow. On iPhone, reaching the hard limit prevents recording and shows No words left with a link to your plan.

Mac and Windows: Enterprise IT-admin accounts require explicit dictation access.


Still stuck?

Contact support if the issue happens only in Outlook after these checks. Include:

  • Your platform, device, and Outlook type: classic, new, web, or mobile.

  • Whether manual paste works.

  • The other apps you tested and the steps you tried.