Reliable text insertion in messaging apps on Android (WhatsApp, Telegram, Messenger, Signal, Slack)

Last updated: November 21, 2026

Available on: Android

If dictated text is missing, duplicated or landing in the wrong place in a messaging app, check the message field and Accessibility access. Recover an unsent dictation from the clipboard or Flow's history before recording it again.


Quick checks

  • Is the text field focused? Tap inside the message box so the cursor is blinking before you dictate, including after sending a message or switching chats.

  • Has the keyboard finished appearing? Dictating while the keyboard is still sliding in or out can misplace text.

  • Does Flow work in another app? Dictate into Google Keep, not Gmail — a failure in Gmail does not establish a system-wide problem. If text appears in Keep, troubleshoot the messaging app; otherwise continue below.


Check Accessibility access

Flow keeps your normal keyboard and needs working Accessibility access to insert text into other apps.

  1. Open Android Settings → Accessibility, or tap Open settings in Flow.

  2. Select Installed apps on Samsung, Wispr Flow on Vivo/Motorola, or Downloaded apps on other manufacturers.

  3. Enable Use Wispr Flow, and tap OK to confirm on Xiaomi.

  4. Keep Wispr Flow shortcut off; the shortcut is not required.

  5. Return to the message field and dictate a short phrase. If it appears correctly, stop; otherwise, continue below.

Flow reconnects as soon as access is granted, including when you re-enable it in Android Settings, and clears the recovery card, notification and Repair bubble on its own.

If the permission screen says “Oops, something isn't right” and “Make sure this shortcut is turned off”, use Open settings to disable the shortcut while keeping Use Wispr Flow enabled.

Note: Flow blocks dictation in password, credit-card, numeric/PIN and phone fields, including custom fields marked as passwords, and in selected banking/financial apps and password managers — not every financial app. Those attempts go to the clipboard instead, hidden from clipboard previews and suggestions. When switching apps or using split-screen, Flow refuses insertion into an app that is neither where dictation started nor the current foreground app.


Recover missing text

If insertion fails or cannot be confirmed, Flow copies the dictation to the clipboard as “Wispr Flow” and shows “Text copied to clipboard” when notifications are allowed. The copy button lasts 5 seconds and copies the text that just failed. The transcript stays in Flow's history even if insertion fails or you miss the button.

  1. Check the message field before pasting; chat apps can briefly delay showing text.

  2. Long-press the message field and choose Paste.

  3. Recover from Flow's history if the clipboard no longer holds the text:

    1. Open Flow's history.

    2. Copy the transcript.

    3. Return to the message field and paste it.

The text appearing once in the intended field means recovery is complete. The bubble's Paste action instead asks Flow to retry insertion; if it fails again, Flow says “Failed to paste text. It is still on your clipboard.” Tapping the Wispr icon dismisses the insertion error without clearing the clipboard.

Flow waits briefly for the field to be ready, but a stalled app can leave text on the clipboard rather than risk a late duplicate. During insertion recovery Flow does not replace existing field contents, and adds text at the end when cursor placement cannot be determined.

If recovery controls disappear or there is nothing to copy

Error bubbles disappear after 8 seconds of inactivity; use history if you miss Paste. If no transcript is available, tapping the copy button reports that there is nothing to copy and dismisses the button. Once your next dictation lands successfully, the failed text is no longer available from the copy button.

A lost connection can show “Connection Lost” / “Your text is now ready, you can paste it or find it in your History.” That text is saved to history and copied to the clipboard.

If the bubble offers Retry instead of Paste

“Failed to transcribe. Saved in the app.” means transcription failed, not insertion. The attempt is saved in history and the audio is kept, so tap Retry to transcribe again. If text is produced but does not appear in your message, use the recovery steps above.


Restore a stopped connection

Flow attempts to return after device restarts, app updates and unexpected stops. Android can block automatic recovery and a blocked attempt is not retried, so open Flow. After an update, recovery guidance can appear about 15 seconds later if Flow has not reconnected.

Accessibility was turned off

Permission is off when you see “Wispr Flow needs attention” with “Re-enable accessibility for Wispr Flow to keep working.”, “Accessibility service was turned off. Tap to re-enable.” after a restart or update, or “Your device paused Wispr Flow's accessibility service. Tap to re-enable.” Flow posts this alert whether or not it starts automatically.

  1. Tap the notification to open Flow's Accessibility permission screen, not Android Settings directly.

  2. Use Go to Settings on Flow's “Flow can't insert text” card if you have no notification.

  3. Follow the Accessibility steps above to enable access.

Flow isn't responding, but Accessibility is on

The “Flow isn't responding” card can take up to about a minute to appear after a stuck start. This recovery does not require granting permission again.

  1. Open Flow, or tap “Flow isn't responding” / “Tap to restart Wispr Flow.” to open its home screen; opening the notification alone does not restart Flow.

  2. Tap Restart Flow on the “Flow isn't responding” card.

If Restart Flow cannot start it — for example, because permission to display over other apps is missing — Flow opens the Accessibility permission screen.

Flow says “Wispr Flow stopped”

This guidance appears only on supported devices. Accessibility can show Flow as on even though Android will not reconnect it; Restart Flow cannot fix this state, and Flow cannot grant itself Accessibility permission.

  1. Open autostart settings if Flow requests it, then allow Wispr Flow to autostart.

  2. Tap Fix in Settings, or the “Wispr Flow stopped” notification, to open the Accessibility guide.

  3. Turn Wispr Flow off in Android Accessibility settings, then on again.

With app notifications disabled, the message is “Wispr Flow stopped. Turn it off and on again in Accessibility settings.” Automatic recovery after this condition varies by device and is limited — reopen Flow rather than relying on it.

After recovery, dictate a short phrase in your messaging app. If text lands correctly, you're done. If it appears in the wrong place or duplicates, close and reopen the messaging app, then dictate a test phrase. After a battery-related interruption, follow the message Flow shows rather than assuming Accessibility must be toggled.

Note: Recovery alerts arrive in the Accessibility Status notification category. Blocking that category hides them with no replacement message, so open Flow for its recovery card. With all app notifications disabled, Flow shows “Re-enable accessibility for Wispr Flow to keep working.” or “Wispr Flow isn't responding. Open the app to restart it.”


Prevent recurring interruptions

Manufacturer battery controls can stop Flow or pause Accessibility. Complete Flow's battery setup if this keeps happening: manufacturer autostart settings do not replace the standard Android battery-optimization exemption, and battery settings prevent recurrence rather than restarting Flow or repairing Accessibility.

  1. Tap Continue on Flow's “Access the Flow Bubble whenever you type” battery-permission screen.

  2. Complete the manufacturer battery or autostart settings that open, then return to Flow.

  3. Complete Battery Details if it opens, then return to Flow again.

  4. Test dictation in your messaging app. If insertion still fails, use the connection recovery above rather than repeating battery setup.

On Xiaomi, Redmi and POCO, the guide directs you to find Wispr Flow and set battery to “No Restrictions”; Skip is also available. Other manufacturers show “Select "Allow" for a consistent experience” and note that battery saving mode disables the Flow Bubble.

Flow can open manufacturer settings on Xiaomi, Huawei, OPPO/Realme, OnePlus, Vivo, Samsung and Transsion devices; on Xiaomi, OPPO, Realme, Vivo, Huawei, OnePlus and Transsion (Tecno, Infinix and itel), setup can then open Battery Details — complete both screens. Battery Details opens only once per setup attempt; tap Continue again to reopen it. Setup monitoring stops after five minutes or if you clear Flow from Recent Apps, and MIUI/HyperOS can require returning to Flow before the exemption registers.

Google Pixel and stock Android

Pixel needs the standard exemption but no extra manufacturer setup.

  1. Open Settings → Apps → Wispr Flow → Battery.

  2. Select Unrestricted on Pixel; on other stock devices, disable battery optimization.

OnePlus can stop Flow even when it is not recording, so an exemption does not prevent every stop. Recheck optimization after system updates because it can revert to “Optimized.”

On Xiaomi/Redmi/POCO, OnePlus, Vivo, Motorola/Lenovo and Transsion devices, also lock Flow in Recent Apps; clearing Flow from Recent Apps on Xiaomi/Redmi/POCO or OnePlus fully stops it. Unlocking the phone can restore a stopped Flow Bubble if you are signed in, setup is complete and Accessibility is still enabled; open Flow if the bubble stays missing.


Still stuck?

Contact support if text still fails after these checks, Flow shows an unexplained error, or insertion fails in only one messaging app.

  1. Open Report an issue in Flow.

  2. Select Issue as the Request type.

  3. Describe the problem, messaging app and version, and what you've tried; a description is required.

  4. Send the report and look for the sent confirmation.

Reports automatically include your device manufacturer/model, Android version, region/timezone and Flow version. You can attach one screenshot: PNG, JPEG, BMP or WebP, up to 10 MB.