Connect and choose a microphone for Flow
Last updated: November 15, 2026
Available on: Mac, Windows, iPhone, Android
If Flow uses the wrong microphone, can't hear your headset or misses your first words, connect and test the device, then choose the input for dictation.
Connect and test the device
Flow recommends built-in or wired microphones; Bluetooth devices are less reliable. A wired headset or desk microphone also works well for whispering.
Plug in a wired or USB microphone, or pair a Bluetooth device in your system's Bluetooth settings.
Check the headset, microphone or keyboard for a hardware mute switch.
Record a short clip in another app — Voice Memos on Mac/iPhone, Sound Recorder on Windows.
If that recording is silent too, fix the hardware or system input before continuing.
Select the microphone on desktop
Note: These choices control dictation; Notetaker always uses Auto-detect. During meeting recording on Mac, the Flow Bar's Microphone (Notetaker) submenu shows Notetaker's microphone instead of a device list. On Mac, Change system microphone… opens Sound → Input. For meeting recording, see Notetaker audio troubleshooting.
Open Flow's Settings → General → Microphone → Change on Mac or Windows.
Choose a connected microphone or Auto-detect.
Speak and check that the selected microphone's live audio-level meter responds.
The Settings dialog tests the selected microphone; changing devices restarts the test. Dictate a short phrase after closing it to confirm the device works.
Alternatively, choose Microphone from the Flow icon in the Mac menu bar or Windows system tray, or right-click the idle Flow Bar. Right-click is ignored in other states unless hovering over an active meeting keeps the bar open. Unavailable devices cannot be selected.
The Settings → General row names the selected mic without opening the picker. Outside meeting recording, Mic in use: shows the active input in the Flow Bar submenu on both platforms, not in the Settings dialog.
Option | When to use it |
Auto-detect | Use your computer's default input as an entry in Flow's microphone ranking. |
Built-in mic (recommended) | Choose your computer's own microphone. |
A device name | Choose a particular connected headset or microphone. |
On Windows, first confirm the intended Auto-detect input in Settings → System → Sound → Input. Flow shortens some device names, so labels may differ from system names; Auto-detect shows its resolved device in parentheses.
Selection changes apply from the next dictation. Connecting a higher-ranked microphone does not interrupt an ongoing dictation.
Set microphone ranking
Flow automatically chooses the highest-ranked available mic. The Auto-detect entry, described as From computer settings, can sit above or below other devices.
Choose Edit Ranking in the Settings microphone dialog on Mac or Windows.
Drag microphones and Auto-detect into your preferred order.
Choose Done Editing.
Ranking controls are not in the Flow Bar submenu or setup mic test. The picker lists devices in ranked order. Manually choosing a non-virtual mic from any Flow control saves it above currently connected devices; disconnected devices above that insertion point keep their places.
The initial order is the selected non-virtual mic, built-in mic, Auto-detect, then remaining connected non-virtual devices. Disconnected entries appear greyed out; only these have a trash control with the tooltip Forget device. Connected entries show a live audio level and cannot be forgotten.
Why rankings change after reconnecting
Ranking identifies microphones by device name, so a device that reports a different name after reconnecting may be treated as new. Opening Settings or the Hub merges duplicate entries for one microphone, keeping the higher rank and the connected device, which can change the automatic selection; two distinct connected microphones stay separate.
If two devices share a generic name and one is unplugged, it may lose its rank and return at the bottom. Blank names and names consisting only of “(USB)” are not merged.
Using a MacBook with the lid closed
Use the Mac's own microphone while wearing headphones. With the MacBook lid closed, built-in inputs are unselectable and show Laptop lid is closed; use an external mic. Automatic selection skips built-in inputs unless no other option is available, and updates when the lid opens or closes.
If a closed-lid dictation using the built-in mic captures no audio, Flow offers Select microphone in a dedicated notice.
When you open your MacBook's lid, the built-in microphone becomes selectable again about a second later, whether or not the Mac went to sleep. You don't need to restart Flow.
When a new microphone prompts you to switch
A newly connected, unranked physical mic can prompt Switch or Don't Switch after a ranking exists. The prompt excludes AirPods and virtual inputs, is suppressed during the Settings mic test, and waits until an ongoing dictation ends. Switch applies the selection without restarting Flow; check it before your next dictation.
AirPods and microphone recommendations
First words are missing on Bluetooth: AirPods and similar devices can take time to start — compare with a built-in or wired mic.
The Settings picker cautions, “AirPods may be slow to start and have more errors in dictation”. This AirPods-specific notice does not apply to other Bluetooth microphones.
At dictation start, Flow may offer Switch microphone or Don't show again. This warning appears at most once per hour, disappears automatically, and Don't show again dismisses it permanently.
For a recommendation, choose Find the right mic for you → in the Settings picker or setup's Change mic dialog. Closing the quiz returns to the Settings picker; during setup, it simply closes.
Virtual inputs need explicit selection
Warning: An unintended virtual input can capture silence or audio other than your voice. Select one only when you intend to route audio through it.
Show other devices
In Settings or the Flow Bar submenu, Show other devices appears when inputs have “(Virtual)” in their system labels. This includes appropriately labelled BlackHole or ZoomAudioDevice inputs, and “Krisp Microphone (Virtual)”; a plain “NVIDIA Broadcast” label stays in the normal list and ranking. Auto-detect is exempt.
Virtual inputs require direct selection: they are excluded from automatic selection and ranking. If a selected virtual input disconnects, Flow falls back to ranked physical microphones.
The section opens automatically when a virtual input is selected. Collapsing it returns the selection to Auto-detect; the Flow Bar's collapse control is Show fewer devices.
Use a microphone on iPhone
iPhone has no individual-device picker, and the Flow Keyboard needs both microphone permission and Full Access. Missing access triggers a keyboard prompt; Flow's permission alerts offer Open Settings. A weekly word-limit notice can also block dictation before permission checks.
Pair your Bluetooth device in iPhone Settings → Bluetooth, if needed.
Open Flow Settings → Audio.
Set Built-in mic using the options below.
Test a short dictation.
Built-in mic | Result |
On (default) | Records through the iPhone while Bluetooth headphone playback remains available. |
Off | Uses the system's selected input, allowing a connected Bluetooth headset mic. |
This preference stays on this iPhone, does not sync across your account, and applies at the start of every dictation, without per-app or per-dictation overrides.
If the chosen input cannot provide a usable audio format when dictation starts, Flow falls back to the built-in mic. If a valid audio format still cannot be obtained, dictation fails rather than recording.
Calls, Siri and Bluetooth connection changes can interrupt a dictation — check the result and start again once the microphone is free. Other system audio-routing overrides do not stop dictation while the built-in mic is the preferred input.
Use a microphone on Android
Flow needs microphone permission. If it is missing, the home screen shows We can't hear you with Allow Microphone; permanent denial sends you to Flow's system settings.
Connect your wired headset or pair Bluetooth in Android Settings.
Allow microphone access if prompted.
Test a dictation in Flow.
Android supplies the active input and Flow has no in-app picker, so if the wrong mic is used, change system routing or disconnect the unwanted device and try again.
During an input change, Flow keeps recording from Android's chosen input without restarting or selecting another device itself. There is no per-device audio-quality setting.
If the microphone disconnects or is blocked
On Mac and Windows, use the recovery action matching the message.
Message | Action |
Selected microphone is unavailable | Choose Microphone opens the picker for selecting a connected input. |
No microphone detected | Use Open Sound Settings to check your input; during setup, Refresh devices retries detection. |
Permission or access error | Follow the message's Open Settings, Troubleshoot or Restart Flow action. |
Open Sound Settings opens Sound → Input on Mac and Sound control panel → Recording on Windows. For denied access, Windows opens microphone privacy settings; Mac shows a microphone-permission notice.
On Mac, Flow rechecks when you return to the app, so restart Flow if the error persists. Test a short dictation after each recovery action.
Microphone disconnected during dictation
If the actively recording microphone disappears during ordinary dictation, Flow stops and offers Insert. This notice can also appear during setup.
Warning: Recovery can return no text if audio is too short, the retry fails or times out, another retry replaces it, or no transcript is produced. Finish any active dictation first; otherwise Flow shows “Cannot retry while dictating.” and inserts nothing.
Focus the text field that should receive the recovered text.
Choose Insert when offered.
Recovered text is inserted automatically into the focused field; no separate paste is needed.
Microphone is in use or unavailable
Another app may hold the microphone, or the audio driver may be stuck.
Close mic-using apps such as Zoom, Microsoft Teams, Google Meet, Discord or FaceTime.
Test a short dictation.
Select another input in Flow's Settings microphone dialog if access is still blocked.
If another Windows app holds the mic:
Open Sound Control Panel → Recording → the microphone's Properties → Advanced.
Turn off Allow applications to take exclusive control of this device.
Test again after changing the input or Windows setting. During setup, Open Sound Settings and Restart Flow are also offered for an in-use microphone; outside setup, Troubleshoot opens microphone help.
Why an error may not appear immediately
Flow retries microphone access before showing a failure, except when permission is denied or you cancel. A successful retry lets dictation continue without an error.
Microphone unavailable and Microphone error appear only if the same failure repeats within two minutes. Permission, no-microphone and selected-microphone errors appear on the first failure.
No microphone detected, Selected microphone is unavailable, Microphone unavailable and Microphone error are Critical notifications and cannot be muted.
Still stuck?
If the microphone works in other apps but not in Flow, contact support with:
Your operating system, microphone model and connection type
The input selected in Flow and the exact error message
The steps you have already tried