Missing first words in transcriptions
Last updated: November 19, 2026
Available on: Mac, Windows, iOS, Android. The device-list microphone picker is available on Mac and Windows.
If your first words are missing, a dictation disappears, or nothing is typed, test your microphone and check the recording to tell an audio problem from a transcription problem.
Quick checks
Pause briefly before speaking. Wait a moment after pressing the hotkey, especially on wireless mics.
Hold, don't tap. Hold the hold-to-talk shortcut while speaking and release to submit. A very short press and release is treated as an accidental tap and does not submit a dictation.
Does your mic work in other apps? Record a clip in Voice Memos (Mac/iOS) or Sound Recorder (Windows). If it's silent there, the problem is system-level, not Flow; otherwise continue below.
Desktop defaults | Hold-to-talk | Hands-free |
Mac | Fn | Fn + Space |
Mac setup when Fn is unavailable | Ctrl + Opt | Ctrl + Opt + Space |
Windows | Ctrl + Win | Ctrl + Win + Space |
Shortcuts can be remapped, so yours may differ. Some first-time Windows setups assign Caps Lock instead; this requires an unchanged Ctrl + Win binding, an unused Caps Lock key, unfinished shortcut setup and no previous assignment change.
For hands-free, press its shortcut once; after setup, you can also double-tap hold-to-talk. Releasing does nothing, and a later press stops and submits.
Warning: Esc dismisses dictation by default on Mac and Windows. Rapid triple presses—or rapid double presses while already hands-free—dismiss rather than submit.
Choose and test a microphone on Mac and Windows
Flow recommends built-in or wired microphones. Bluetooth devices are less reliable; AirPods may start slowly and produce more dictation errors.
Warning: Opening the microphone test while you are still dictating — including from a “no audio” notification — ends that dictation. Flow attempts to save its audio in History for Recover, but saving can fail or omit the final audio. This save excludes dictations already processing or being retried.
Note: This microphone choice applies only to dictation; Notetaker always uses Auto-detect. Dictation shortcuts do not work while the microphone test is open.
Open Flow Settings → General → Microphone → Change (Change microphone during onboarding).
Select Built-in mic (recommended), a wired USB mic, or your preferred connected microphone.
Speak while the picker is open; the live volume bar beside the selected device should move.
Close the picker and dictate a test phrase. If all your words appear, you're done.
Auto-detect (“From computer settings”) follows your computer's default input. Switching devices restarts the microphone test.
Press Esc (even while another app is in front) or Dismiss on the notification to close the test and stop its recording. The picker opened within onboarding's microphone test stays open on global Esc.
If Flow uses a different microphone
Selecting a microphone moves it above currently connected devices in Flow's preference ranking, not above unplugged devices. Edit Ranking lets you drag to reorder or Forget device for disconnected entries. Flow follows the highest-ranked connected input, then built-in, then Auto-detect.
Explicitly selected virtual/loopback inputs take priority while connected. Find them under Show other devices; they are never automatically selected or ranked. Collapsing that section returns to Auto-detect; disconnecting the selected virtual input returns to the ranking.
Connecting a higher-ranked mic during dictation affects the next dictation, not the current one. During onboarding, Flow preselects built-in only if no microphone was chosen; on Mac, it waits until it detects an open lid.
If your Mac's lid is closed
A Mac's built-in mic cannot work with the lid closed. Built-in choices—including Auto-detect when it uses that mic—are disabled in the picker and Edit Ranking, marked “Laptop lid is closed”. Flow avoids them except as a last resort.
If that mic captures no audio, “Your laptop lid is closed” replaces the generic no-audio message. Use Select microphone to pick another connected input; it need not be USB or wireless. Opening the lid restores the built-in mic without restarting Flow. Windows has no lid-closed handling.
If Flow cannot hear you
On desktop, use the action for your message, then dictate a test phrase; if text still does not appear, continue with the platform checks below.
Message | Action |
Microphone Permission Required (Mac) | Follow the Mac permission steps below. |
Microphone access is disabled (Windows) | Click Open Settings and enable access under Privacy & security → Microphone. |
No microphone detected | Connect a mic or use Open Sound Settings to select an input. |
Selected microphone is unavailable | Click Choose Microphone to select a connected device in Flow. |
Microphone unavailable | Close other apps using the mic, then try again, or select Troubleshoot. |
Microphone error | Reconnect the microphone, then try again, or select Troubleshoot. |
Is your microphone muted? / We couldn't hear you | Use Select microphone to choose an input, or select Troubleshoot. |
Unable to access mic | Use Restart App only if recording has not resumed. |
Microphone disconnected | Recording stops; click Insert to insert the text recorded so far. |
No audio received | Contact us is the only action. |
Microphone is not working | Stop dictating, then use Select microphone or Contact us. |
Troubleshoot opens microphone troubleshooting in your browser. “Is your microphone muted?” and “We couldn't hear you” are separate messages naming the microphone in use.
Grant microphone access on Mac
“Microphone Permission Required” appears when microphone access fails as dictation starts, not simply because a recording is silent.
Click Grant Permission.
Allow access in the system permission prompt if you have not answered it before.
Enable Flow in System Settings → Privacy & Security → Microphone if access was previously answered or you decline the prompt.
Otherwise, Grant Permission opens that settings page directly. Dictate a test phrase after enabling access; if words remain missing, check the recording below.
On Mac, Open Sound Settings opens the Sound Input pane, not microphone privacy settings.
Check Windows input settings
Flow's Open Sound Settings button opens the classic Sound control panel's Recording tab, not the Settings page below.
Open Windows Settings → System → Sound → Input.
Confirm your preferred microphone is the default input device.
Open the microphone's Properties page using > beside its name.
Select Start test under Input settings and speak normally.
Select Stop test.
Select Play to hear your recorded sample.
Return to Flow and dictate a test phrase. If all your words appear, you're done.
If messages disappear or do not repeat
“Unable to access mic” appears after 8 seconds without access and clears itself if access succeeds; restarting is unnecessary then.
“No microphone detected”, “Selected microphone is unavailable”, “Microphone unavailable” and “Microphone error” appear at most once per 60 seconds. The last two appear only after a repeated failure of the same kind, not the first occurrence.
After audio has been captured, 5 seconds without audio triggers “No audio received”; at 15 seconds, “Microphone is not working” stays visible until resolved. Both clear when audio returns and do not appear during microphone testing.
Mobile
iOS and Android use the system default microphone; there is no picker listing individual devices.
Warning: On iOS, connecting or disconnecting an audio device during dictation stops that dictation rather than switching mics live. An interruption such as an incoming call also stops recording. Change accessories before testing.
Disconnect your wireless device in system Settings → Bluetooth, or plug in a wired accessory.
Dictate a test phrase: if all your words appear, you're done.
iOS permissions or recording failure
The Flow keyboard requires both Full Access and microphone permission; if it produces nothing at all, enable Full Access.
Tap Finish setup for the keyboard's Full Access prompt, or Go to Settings for microphone permission.
Enable the missing permission in Settings.
Dictate a test phrase; if nothing appears, check the error message.
Separate Enable full access and Enable Microphone alerts offer Open settings. If microphone permission is denied when recording starts, recording stops and Enable Microphone says “Enable microphone permission in the Settings app”.
“Can't turn on Flow right now” means another app is using the microphone: close that app, then tap Retry to restart recording. Dismiss closes the failure screen. An unavailable or busy microphone can prevent recording from starting.
Keyboard error sheets also offer Retry for recording, transcription, network, microphone, permission or processing failures; follow the cause shown.
Check what was recorded on desktop
Important: If dictation audio is not kept on your device, there is nothing to extract. History disabled replaces the history list when your or your organization's retention policy disables storage.
Note: Audio older than 14 days cannot be extracted, played or retried.
“Audio is silent.” means no words were detected in captured audio. “Couldn't access your microphone.” means no usable recording exists. “Your transcription was interrupted. But Flow can still retry it for you.” identifies a transcription failure.
Open the Flow Hub and go to the Home page.
Find your recent dictation.
Select Play audio on its row to listen without downloading.
Playback has a Pause audio control; playing another row stops the previous one.
Download or retry a recording
To download the recording:
Open the dictation card's More options menu.
Select Extract audio to download a WAV file, then play it.
Extraction can fail with “Cannot download audio as it is no longer available (unexpected error)”.
Inline Retry for empty or errored dictations requires at least 5 seconds of recording and unexpired audio. Recover for dismissed or interrupted dictations has no duration minimum.
The menu's Retry transcript has no duration minimum and may remain available after expiry, but expired audio still cannot be retried. It is disabled while loading or dictating; a retry attempted during dictation shows “Cannot retry while dictating”.
If the audio contains the missing words, contact support about transcription. If the recording also lacks them, return to microphone selection and testing.
Still stuck?
Contact support if first words remain missing after testing, the audio contains words absent from the transcript, or a recent recording cannot be extracted. Include your platform, microphone type, what you tried and the audio-test result.
Mac and Windows: Hub sidebar → Help → Talk to support, or the same item in the Flow tray or menu-bar icon menu. On Mac, you can also use Cmd+/ or the Help menu. The dialog has Report an issue and Share feedback tabs; the report form asks for a request type and issue details, with file-size and file-count limits on attachments.
iOS: Menu → Talk to Support → Report an issue.
Android: Drawer menu → Report an issue, or Report transcription from the affected transcript.