Starting your first dictation
Last updated: November 17, 2026
Available on: Mac, Windows, iOS and Android
Flow turns speech into formatted text in the field where you're writing. For your first dictation, finish setup, grant the requested permissions and try a short sentence in a note or message.
Mac and Windows
Keyboard | Push to talk |
Mac | Fn |
Mac without an Apple Fn key | Ctrl + Opt |
Windows | Ctrl + Win |
These are the defaults; Macs without an Apple Fn key receive alternate shortcuts during onboarding, and some first-time Windows users receive Caps Lock instead. Check or change yours in Settings → General → Shortcuts → Change.
Open the app where you want to write and click a text field so the cursor is visible.
Press and hold your Push to talk shortcut and speak.
Release the shortcut and wait for your formatted text to appear in the field that is focused at that moment.
To cancel without inserting, press Esc, the default cancel shortcut, or your replacement shortcut; plain Push to talk has no stop or cancel button on the Flow Bar. A tap shorter than half a second does not paste — without another press, Flow cancels after another half second, so start again and hold the shortcut. Pressing another app shortcut within one second of starting Push to talk also cancels it.
iPhone
Note: Full Access and microphone permission are separate. If you see "Almost there!", select Finish setup and follow the guidance to Settings; in the app, two setup pages appear first. If microphone permission was denied, use Go to Settings to enable it.
Open Flow, sign in and finish onboarding, allowing microphone access at the microphone step.
Enable the Flow keyboard and its Full Access permission if prompted.
Tap a text field in a note, document or message and switch to the Flow keyboard.
Tap the microphone button, or Start if shown, then speak naturally.
Tap the check button to finish, and wait for the formatted text to appear.
Until you sign in and finish onboarding, starts from outside the app — the Action button, Shortcuts, Control Center or a keyboard notification — are ignored. Start can open Flow and begin recording there instead of recording in place.
The X cancels without inserting text; during processing, tapping the progress indicator also cancels. Incoming calls and connecting or disconnecting headphones or Bluetooth audio stop recording automatically. If you see a signed-out or no-network screen, sign in or reconnect; after an audio failure, Retry starts a new recording in Flow.
The in-app record control requires microphone permission, and the Dictation tab shows keyboard setup instead of History until the keyboard is installed with Full Access. See Set up the Flow keyboard on iPhone.
Android
Note: The bubble, including its repair controls, appears only after onboarding is complete for the signed-in account. The battery-optimization step is skippable on every device. Google/Pixel and unrecognized manufacturers have no extra manufacturer-specific battery or autostart steps, but standard permissions and battery guidance still apply. Follow Android setup for your phone.
Complete onboarding with Microphone, Accessibility Service and Display over other apps enabled.
Tap a text field in another app with the on-screen keyboard visible.
Tap the Flow Bubble at the screen edge.
Speak your sentence.
Tap the checkmark (Done); text is inserted automatically after transcription.
Tap X during recording or transcription to discard the dictation, and use the action buttons rather than the bubble body during recording or recovery. Offline devices cannot start dictation; tapping shows an offline message. Without microphone permission, a start attempt opens the permission prompt instead of recording.
The bubble hides when the keyboard is dismissed, and restricted banking apps and password, numeric and phone fields suppress it. Narrow browser-address-bar and notification-reply exceptions do not override banking-app restrictions, and not every banking app is restricted.
If the bubble is missing or cannot insert text
Open Flow and follow the permission or recovery cards shown; more than one can appear.
Permissions: use Allow Microphone or Go to Settings for microphone, accessibility or Display over other apps access. "Enable Flow bubble on screen" identifies the last permission; granting it returns you to Flow.
Flow Bubble Disabled: select Turn Back On; this card appears only when all three permissions are granted.
Flow isn't responding: select Restart Flow when shown; it can take about a minute to appear even with accessibility enabled.
Keep Wispr Flow running: select Allow to remove battery optimization after skipping that setup step.
If "Wispr Flow stopped" appears while Settings already shows accessibility enabled:
Complete the autostart instructions first if directed there on Xiaomi, Huawei or Transsion phones.
Turn Flow accessibility off in Settings, then back on.
Return to a text field with the keyboard showing and try a short dictation.
Flow reconnects after accessibility is re-enabled without reopening the app. If text still does not appear, see Flow Bubble troubleshooting.
Check the result
Read the inserted text before sending it. With formatting set to None, Flow leaves dictation unformatted, including fillers, repetitions and self-corrections.
Session limits: Mac and Windows warn at 19 minutes and stop at 20, with "Transcription session ended." saying "Flow supports up to 20 minutes per session." Select Recover text; after the card disappears in 10 seconds, use History instead. Recovery requires saved audio.
Android warns with a message and vibration at about 3 minutes 59 seconds, then stops and submits at about 4 minutes 59 seconds. The ending message says "Session ended, 5-minute limit reached"; a "Session ended" notification says "Flow supports up to 5 minutes per session".
Warning: Desktop insertion briefly uses the clipboard, then restores your previous copy after an app takes the text. Until restoration finishes, pasting anywhere pastes the dictation again. If insertion never reaches an app, the transcript stays on the clipboard for manual pasting instead.
On Mac, restoration happens about half a second after an app takes the text; a new copy made during that window can be overwritten by the previous clipboard contents, so wait before copying again.
On Windows, the wait is about half a second, three seconds for Outlook (classic and new), Word and WhatsApp, or five seconds for recognized remote-desktop apps. It starts when an app reads the clipboard, not when you press paste, and the destination app selected at insertion determines the delay. An unlisted slow app can still paste your previous copy. A new copy you make during the wait is kept.
If dictation does not start or finish
Important: Past dictations appear in Recent activity or History only when your storage settings allow, so recovery is not guaranteed. Retention settings can prevent or delete saved dictations, and an organization's Never store policy locks the setting on desktop and iOS, with no audio stored on desktop under that policy. Desktop cancellations with under half a second of audio are discarded and not saved in History.
Desktop recording does not start or hears nothing
Dictation cannot start while signed out, while microphone testing is open, before Flow is ready, when disabled by your IT administrator, or at the weekly word limit for a non-paying plan.
For "Microphone access is disabled" on Windows, select Open Settings to enable microphone access. On Mac, Grant Permission opens the permission prompt or Privacy & Security → Microphone.
With zero captured audio, Flow sends nothing for transcription and inserts no text; after recording stops it shows a hold-shortcut, microphone or Mac closed-lid message. A Mac's built-in microphone cannot be used with the lid closed.
Very quiet audio still goes to transcription. If no usable text comes back, "We couldn't hear you" offers Select microphone and Troubleshoot; move closer to your microphone or raise its input level in your system sound settings.
If the microphone disconnected during recording, select Insert on its message to recover text recorded before the disconnect. Try a short dictation afterwards; if text appears, you're done.
Desktop text was not inserted
When the failure message shows a transcript, it puts that text on the clipboard and offers Copy. If the message is not shown, it does not make this additional clipboard change.
Warning: The transcript shown in this message replaces your previous copy rather than restoring it.
Click the intended text field.
Paste with Cmd + V on Mac or Ctrl + V on Windows when the transcript is on the clipboard.
If no transcript is shown, use the paste-last-transcript shortcut in the prompt: Ctrl + Cmd + V on Mac or Alt + Shift + Z on Windows, unless customized. On Windows, "Update admin settings to paste!" directs you to run Flow as Administrator.
Check that text appears in the intended field. For further help, see Fix text not pasting after dictation.
Desktop processing or transcription did not finish
"Flow was processing your last transcript" means the new dictation did not start. Wait for processing to finish, then start again.
Dismissing a notification does not cancel transcription. The card's Cancel button or the cancellation shortcut shown — your configured shortcut, falling back to Esc — clears the notification and cancels the ongoing work.
For a network or transcription failure, check your connection. "Is your internet connected?" has no buttons; Retry and Open History are on the separate transcription-error card.
Recover text and Retry transcribe saved audio again before inserting the result into the focused field. Finish any active dictation first; otherwise Flow says "Cannot retry while dictating."
Recovery can insert nothing if audio is unavailable or too short, the retry expires or is interrupted, or the result is empty or cannot be saved. Starting another dictation can interrupt a retry without saving or inserting its result, so check for recovered text before starting over.
Android start, insertion or transcription failed
If weekly word-limit notices apply to your account, a warning or soft-limit notice holds one start attempt per reset week and the next press starts recording. At the hard limit, every start attempt is blocked.
After insertion fails, Paste retries the retained transcript, not your most recently copied content, and Flow also copies the transcript to the clipboard. A temporary Copy to clipboard button appears when insertion could not be confirmed, but not after confirmed success.
Paste manually if Flow says "Failed to paste text. It is still on your clipboard." Tapping the Wispr icon on this insertion error dismisses it and keeps the clipboard text.
For "Failed to transcribe. Saved in the app.", Retry makes one attempt using captured audio when available. Only one retry of the same recording can run at a time, and no new dictation can start during a bubble retry; pressing it shows "Still retrying your last dictation. Try again in a moment."
History reports when audio is missing, cannot be found or is too long to transcribe again; other retry failures say "Retry failed. Please try again." A recording with nothing audible finishes without text. On a transcription-error card, the Wispr icon starts a new dictation rather than dismissing the error.
Check that text appears in the intended field before starting over.
Still stuck?
Contact support if dictation still cannot start, or text cannot be inserted, after the matching recovery steps. Include your platform, device, the exact message and the steps you tried.